Which flight software settings to use for an RGB mission ?

  • Updated

Below is an overview of typical DJI GSPRO an DJI Pilot settings for plant phenotyping RGB flights.

 

Plant Phenotyping RGB - DJI GSPRO

       
   

Data Product

Plant Phenotyping

   

Flight Type

RGB

GSPro settings

General

Product Type

3D Map Area

Basic parameters

Shooting angle

Parallel to main path

Capture mode

Capture at Equal Distance Interval

Flight course mode

Scan Mode

Resolution

0.2 cm/px;0.5 cm/px;1 cm/px

Advanced parameters

Front overlap

80

Side overlap

80

Gimbal pitch

-90 (nadir)

Course Angle

Use the Course Angle to align the flight path to fly along the longest axis of the field

 

Margin

Adjust such that the flight path Is at least 2 flight lines outside the boundaries in all directions

 

 

    Flight lines

Area should be completely covered and extended with at least 2 flight lines at each side.

This because we should at least have pictures of all GCPs from all directions!

Along the longest axis of the field!

 

 

Timing & cloud cover 

From 9am - 5pm

No cloud cover restrictions 

 

 

Example

mceclip1.png

Check predicted weather conditions. Following weather and timing limitations should be taken into account depending on the product type.

 

 

Plant Phenotyping RGB - DJI Pilot

       
   

Data Product

Plant Phenotyping

   

Flight Type

RGB

DJI Polit settings

General

Mission Type

Mapping

Basic parameters

Smart Oblique

OFF

Altitude mode

Relative to take-off point (ALT)

Target Surface to Take-off

Set elevation difference between take-off and elevation at ROI

GSD

0.2 cm/px;0.5 cm/px;1 cm/px

Take-off Speed

Default

Advanced parameters

Front overlap

80

Side overlap

80

Course Angle

Use the Course Angle to align the flight path to fly along the longest axis of the field

 

Margin

Adjust such that the flight path Is at least 2 flight lines outside the boundaries in all directions

Photo Mode

Trigger on Distance

Focus Mode

First Waypoint Autofocus

Dewarping

OFF

 

 

    Flight lines

Area should be completely covered and extended with at least 2 flight lines at each side.

This because we should at least have pictures of all GCPs from all directions!

Along the longest axis of the field!

 

 

Timing & cloud cover 

From 9am - 5pm

No cloud cover restrictions 

 

 

Example

mceclip2.png

Check predicted weather conditions. Following weather and timing limitations should be taken into account depending on the product type.